CATCAN SMARTSERVO SS-14+ 規格說明

CATCAN SMARTSERVO SS-14+

 

Material of housingPlastic with metal heat sink.


Material of gear setAluminum, copper and Carbonate Gear


Dimension:40.5 x 20x 44mm


Weight: 50g


Ball bearing2


Servo horn : T-type and cross-disk.


Working voltage5.4V – 7.5V


Temperature sensing range-40°C – +125°C


D/A resolution1024

Operation range: -75~75


Communication interface I²C


I²C frequency100KHz – 400KHz


Torque14.6Kg/cm at 6V


Speed: variable


Built-in sensorsvoltage sensorcurrent sensortemperature sensortorque and speed sensors.


Co-Axis fixtureOne on the bottom side


PID parameterIntegrated adjustable PID controller.


Readable data/parameterservo addressdevice typevoltageloading currenttemperaturecurrent positiontarget positionangular travel speedout put power statusPID parameters


Configurable parametersservo addresstarget positionangular travel speedPID parametergroup control Nrpower out put levelreset

Pin out


One thought on “CATCAN SMARTSERVO SS-14+ 規格說明

  1. ytear_w says:

    請問一下,這個馬達要用labview控制,在裝到NXT上,要怎麼先入手?我是新手,所以不知道從何下手。有範例程式或中文介紹手冊嗎?

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *